— Cheat sheet

Quick keys

All 81 key combinations in the guide, gathered from every chapter. Pick keys to see only the combos that use them — select SHIFT and ARP | SEQ to find everything you can do with that pair — or type what you want to do.

81 of 81 combinations

Presets

Turn PRESET: Loads the next or previous preset.; Loading presets
Press PRESET: Loads the preset you have scrolled to.Click to Load on; Loading presets
Press PRESET three times: Resets the current sound to the empty Init state — press quickly, in a row.; Loading presets
SAVE: Enters save mode.; Saving presets
SAVE: Cancels saving; the display shows Save Cancelled.Just after entering save mode; Saving presets
Long press SAVE: Quick-saves the sound to its current slot; the display shows Preset saved.; Saving presets
Turn PRESET: Chooses the slot, the category or the next character.Save mode; Saving presets
Press PRESET: Confirms the slot, category or character and moves on.Save mode; Saving presets
SHIFT + turn PRESET: Jumps between the A, a, 0 and . character ranges.Naming a preset; Saving presets
Push and turn PRESET: Edits a character in an existing name.Naming a preset; Saving presets
SAVE: Stores the preset with its new name.Naming a preset; Saving presets
PANEL: Applies the current position of every knob to the loaded preset.; Panel mode

The modulation matrix

Turn MATRIX: Selects the next or previous patch point.; The matrix
Press MATRIX: Enters or leaves edit mode for the selected point.; The matrix
Turn MATRIX: Sets the amount, from −100% to +100%.Edit mode; The matrix
Hold MATRIX for half a second: Clears the selected point and resets its amount to zero.; The matrix
SHIFT + long press MATRIX: Clears every routing on the matrix.; The matrix
Hold ASSIGN 1 + turn a knob: Makes that knob the destination of the Assign 1 column.; Assignable destinations
Hold ASSIGN 2 + turn a knob: Makes that knob the destination of the Assign 2 column.; Assignable destinations
Hold ASSIGN 3 + turn a knob: Makes that knob the destination of the Assign 3 column.; Assignable destinations
Hold ASSIGN 1, ASSIGN 2 or ASSIGN 3 + turn MATRIX to a point: Makes that matrix point’s amount the destination of the Assign column.; Assignable destinations
Hold ASSIGN 1, ASSIGN 2 or ASSIGN 3 + turn TYPE: Makes the sample slot the destination of the Assign column.Sample select menu open; Assignable destinations

The digital oscillator

SHIFT + turn WAVE: Changes Wave at the opposite speed to the Osc Knob Speed setting.; Oscillator basics
SHIFT + turn TIMBRE: Changes Timbre at the opposite speed to the Osc Knob Speed setting.; Oscillator basics
SHIFT + turn SHAPE: Changes Shape at the opposite speed to the Osc Knob Speed setting.; Oscillator basics
SHIFT + turn TYPE: Opens the sample select menu and browses the sample slots.Sample, Scan Grains, Cloud Grains or Hit Grains selected; Sample

The analog filter

FILTER TYPE: Switches between the low-pass, band-pass and high-pass filter.; Filter types and cutoff

Envelopes & LFO

AMP MOD: Switches envelope control of the volume on or off.; Amp Mod
MODE: Selects the cycling envelope mode: Env, Run or Loop.; The cycling envelope
SHIFT + turn RISE: Changes the curve of the Rise stage, from logarithmic through linear to exponential.; The cycling envelope
SHIFT + turn FALL: Changes the curve of the Fall stage, from logarithmic through linear to exponential.; The cycling envelope
LFO SHAPE: Selects the LFO waveform from the six shapes.; The LFO
Press LFO RATE: Switches tempo sync on or off. The Sync LED lights when it’s on.; The LFO

Keyboard & touch strip

OCT DOWN / OCT UP: Transposes the keyboard down or up one octave, to a maximum of three octaves either way.; Octave buttons
HOLD: Turns Key Hold on or off; while it is on, the keys you hold keep sounding after you lift your fingers.Arpeggiator and sequencer off; Key hold
SPICE, then slide along the touch strip: Sets the amount of variation you hear — further right means more.Arpeggiator or sequencer running; Spice & Dice
DICE, then tap the touch strip: Rolls the dice for a new random variation; touches near the left make small changes, near the right a complete reshuffle.Arpeggiator or sequencer running; Spice & Dice
BEND, then touch the strip: Bends the pitch up or down from the centre of the strip.; The bend strip

Arpeggiator & sequencer

ARP | SEQ: Turns the arpeggiator on or off; the button lights white while it is on.; The arpeggiator
HOLD: Keeps the arpeggio playing after you lift your fingers; playing new keys replaces the held notes, and turning Hold off clears them.Arpeggiator; The arpeggiator
UP | A: Plays the held notes from lowest to highest, whatever order you pressed them in.Arpeggiator; Arp modes and Pattern
ORDER | B: Plays the notes in the order you pressed them.Arpeggiator; Arp modes and Pattern
RANDOM | REC: Plays the held notes in random order.Arpeggiator; Arp modes and Pattern
PATTERN | PLAY: Generates a semi-random pattern from the keys you hold, with a fresh pattern each time you press a key.Arpeggiator; Arp modes and Pattern
Turn RATE/SWING: Sets the speed: a tempo in BPM, or a note division when synced.; Arp rate, sync and swing
Press RATE/SWING: Switches sync on or off; the Sync LED lights while sync is on.; Arp rate, sync and swing
Hold SHIFT + turn RATE/SWING: Sets the swing amount, from 50% to 75%.; Arp rate, sync and swing
OCT | MOD: Steps the arpeggio range through 1, 2, 3 and 4 octaves.Arpeggiator; Arp range and transposing
OCT DOWN / OCT UP: Moves the keyboard down or up an octave for the next notes you add, without changing the pitch of the arpeggio already playing.Arpeggiator playing; Arp range and transposing
SHIFT + KEY: Transposes the arpeggio, with the interval shown on the display; with Hold on, it lasts until you play a new arpeggio.Arpeggiator; Arp range and transposing
SHIFT + UP | A: Transfers the current arpeggio to sequence A.Arpeggiator; Turning an arpeggio into a sequence
SHIFT + ORDER | B: Transfers the current arpeggio to sequence B.Arpeggiator; Turning an arpeggio into a sequence
SHIFT + ARP | SEQ: Toggles between the arpeggiator and the sequencer.; The sequencer
UP | A / ORDER | B: Loads sequence A or B, confirmed on the display; during playback, switches to that sequence.Sequencer; The sequencer
PATTERN | PLAY: Starts or stops playback.Sequencer; The sequencer
RANDOM | REC: Turns on step recording; the pad lights.Sequencer stopped; Step recording
HOLD: Enters a rest in the current step and moves to the next one.Step record mode; Step recording
Hold KEY + HOLD: Ties the held note or chord into the next step; press again to extend it further.Step record mode; Step recording
Hold SHIFT + turn RATE/SWING: Changes the sequence length on the fly.Step record mode; Step recording
PATTERN | PLAY, then RANDOM | REC: Starts real-time recording; the record pad blinks. Pressing RANDOM | REC while a sequence is already playing does the same.Sequencer; Real-time recording
HOLD: Erases the notes and modulation the sequence passes over while you press it, leaving silence to fill on the next pass.Real-time recording; Real-time recording
RANDOM | REC, then turn RATE/SWING: Scrubs through the steps for editing, playing each one as you land on it.Sequencer stopped; Editing, copying and clearing sequences
SHIFT + KEY: Transposes the sequence.Sequencer, record off; Editing, copying and clearing sequences
SHIFT + UP | A / ORDER | B: Reloads sequence A or B as it was last saved, undoing your most recent recording.Sequencer, record off; Editing, copying and clearing sequences
Hold UP | A + hold HOLD for 1 second: Clears sequence A; both pads blink, and it is erased when they stop.Sequencer, record off; Editing, copying and clearing sequences
Hold ORDER | B + hold HOLD for 1 second: Clears sequence B; both pads blink, and it is erased when they stop.Sequencer, record off; Editing, copying and clearing sequences
Hold UP | A + ORDER | B: Copies sequence A to sequence B.Sequencer; Editing, copying and clearing sequences
Hold ORDER | B + UP | A: Copies sequence B to sequence A.Sequencer; Editing, copying and clearing sequences
OCT | MOD: Steps through the active modulation tracks; the selected track’s light blinks.Sequencer; Modulation tracks
Hold OCT | MOD + HOLD: Erases the selected modulation track.Sequencer; Modulation tracks
Keep OCT | MOD held and press HOLD repeatedly: Erases the next modulation track with each press, until all of them are clear.Sequencer; Modulation tracks

Scales & paraphony

PARAPHONIC: Switches paraphonic four-voice playing on or off.; Paraphonic mode and chord mode
Hold PARAPHONIC + play a chord: Stores the chord and enters chord mode, so each key plays that chord shape.; Paraphonic mode and chord mode
PARAPHONIC: Leaves chord mode.Chord mode; Paraphonic mode and chord mode
SHIFT + PARAPHONIC: Switches unison mode on; PARAPHONIC blinks.; Unison
Hold PARAPHONIC + turn PRESET: Sets the unison spread, shown on the display from 0.001 to 12.000.Right after SHIFT + PARAPHONIC, with SHIFT released; Unison
PARAPHONIC: Switches unison mode off.Unison mode; Unison
Hold ASSIGN 1, ASSIGN 2 or ASSIGN 3 + PARAPHONIC: Makes Unison Spread the destination of that Assign column in the matrix.; Unison

Utility & MIDI Control Center

UTILITY: Opens the Utility menu.; Utility: preset settings
Turn PRESET: Scrolls through menu entries, or changes the value being edited.Utility menu; Utility: preset settings
Press PRESET: Opens the highlighted submenu or setting for editing.Utility menu; Utility: preset settings